This is a Digital File Download for a DIY 3D Printable Model - Not A Physical (Tangible) Item
COLLAR PLATE for Mandalorian Armor 3D Printable Model File
LAST UPDATE 1/2020 - Added a 1 piece STL file for large volume printers. You can re-download the .zip file from your Digital Download purchases under your Profile and Purchases.
UNIQUE FEATURE: We've added insets for snaps on the back side, so you can easily attach/remove the collar plate to your vest.
OPTIONAL HARDWARE NOT INCLUDED WITH DIGITAL FILE: 3/8" Socket, 5/8" Cap Snaps can be installed into the inserts on the back.
We get our snaps from Amazon -> https://amzn.to/3140muC
QUALITY CHECKED IN SIMPLIFY 3D AND TEST PRINTED: We print all the parts in our 3D MODEL FILES (STL's) to ensure you get a quality 3D Printable Model File and a functional part! In most cases, the DIY 3D Model Files that we sell are the VERY SAME FILES WE USE TO MAKE THE PHYSICAL ITEM.
PRINTING THE FILE: The model has been test printed and prints great on Creality CR-10 and Artillery Sidewinder X1.
The file includes 2 versions of the model: one version as a complete piece that you can slice yourself, and a second version that's been pre-cut into 2 pieces for easier printing. The two piece version is easy to assemble; a tight fit snaps the pieces together, then glue. Finish by sanding & priming with 2 in 1 Filler Primer to hide the connection joint.
Model can be modified for smaller volume printers using a program like Meshmixer.
Model can be scaled in slicing software.
We print this file in 2 pieces vertically, from outside flat edge to inner curve where the pieces meet. Using rafts helps prevent the parts from breaking off the bed when it gets a couple inches tall. Check our Instagram for a video showing the collar plates printing.
We print our Mandalorian Helmets & Armor with FilaCube PLA 2 at 0.2 mm layer height, with 5 perimeters/top & bottom layers, and 20% infill.
Can be printed in PLA, PETG, or ABS if desired.
WHERE TO GET YOUR FILES: After purchasing your files are available for download anytime once payment has been confirmed. You can find your Digital Download purchases under your Profile and Purchases.
PLEASE TAG US ON SOCIAL MEDIA SO WE CAN SEE IT IN THE WILD! And we'd be ever so grateful if you'd credit us with the 3D Model File used for your cosplay creation - @makerbak3d on Instagram, Twitter & Facebook. Thank you!
NOT INTO DIY? Order our Mandalorian Body Armor Kit 3D Printed, Ready To Paint & Shipped To Your Door - etsy.com/listing/737563839
FOR INDIVIDUAL PERSONAL USE ONLY. PLEASE DO NOT SHARE OR DISTRIBUTE FILES.
NOT FOR USE IN ANY COMMERCIAL ASPECT! DO NOT DUPLICATE, CAST, MASS PRODUCE, OR SELL THE FILE OR THE PHYSICAL OBJECT FOR PROFIT.
THIS IS THE WAY.
This is not an official licensed product and is only considered fan art protected under the fair-use act.
Not associated with LUCASFILM LTD. ™ or any LFL Ltd. ™ Film or Franchise. "Star Wars" is a registered trademark of LucasFilm Ltd. The Star Wars logo, characters, prop designs and names © LucasFilm Ltd. This document and related sites/products is not sponsored or endorsed by LucasFilm Ltd. or any of its affiliates. All © and ™ are property of their respected owners and are used here for comparative or descriptive purposes only.
Your files will be available to download once payment is confirmed.
Request a cancellation within: 24 hours of purchase
But please contact me if you have any problems with your order.
Unless otherwise noted, helmets and armor are made to fit most males from 5'7" to 6'6". Some listings do have specific sizes noted, please take a moment to read them where included. Most items can be scaled if you feel they may not fit. There may or not be an additional charge depending on the item and material usage change. Please include your measurements with your order, or message us with any questions you may have before placing an order.
We are located in the U.S. and observe all National Holidays. If your order is due to ship on a National Holiday, when the U.S. Postal Service is closed, your ship date will be delayed until the next business day.
No, our Unfinished Kits are raw 3D prints, right off the printer. We do basic support removal, and include finishing recommendations. All you'll need is some sandpaper in several grits, primer, possibly some putty, and some elbow grease. Yes, you can sand 3D prints, just don't over do it and sand correctly. Move in circular motions when possible and keep moving; don't sand in one spot too long or you could heat the area and damage your part. However, the majority of our Armor plates are 5mm thick, you'd have to go hard at it to damage them by sanding! If you have any questions, just contact us we're happy to share our process.
No, finishing the interior of your helmet is easily done with readily available felt and/or foam. You'll need to add padding to specific areas to make the helmet sit correctly on your head, so it's best to do it yourself. We promise it's really not hard at all! There are plenty of videos on YouTube to show you how to go about padding out the interior of your MakerBak3D helmet. ;-)
Yes, it is! We just had a customer have his helmet inspected by an Idaho Regional MMCC Rep, who said it looked really nice. :-)
We do not accept returns because each item is made to order, just for you. If you have any problems with your order once received, please contact us so we can make it right.
Our listings include size information for each helmet. Generally, Male character helmets fit up to 24" diameter heads, and Female character helmets fit up to 23.5" heads. We measure around the forehead, and that will leave room between your nose and the T-Visor in our helmets. You'll also have enough room for your interior finish/padding, and any electronics/fans you may want to install.
Packages are sent to the address entered at the time of the order only, and we're not responsible for packages delivered due to incorrect address entry. ETSY PROTECTION DOES NOT ALLOW US TO CHANGE BUYER'S SHIPPING ADDRESS ENTERED AT THE TIME OF PURCHASE.
How to update your shipping address on Etsy.com:
1. Click the "Your Account" icon (top right).
2. Click "Purchases and Reviews".
3. To the right of your order, you’ll see either "Shipped" or "Not Shipped".
If your item is Not Shipped yet:
1. Contact us to cancel your order.
2. Update your shipping address in your Etsy profile.
3. Re-Order your items with the correct shipping address in your Profile.
If your item has Shipped, contact your Post Office and us immediately. Be Proactive!