Mandalorian 3D STL File Sabine Wren Helmet Printable Model

Mandalorian 3D STL File Sabine Wren Helmet Printable Model

$35.00

Instant Digital Download

This is a Digital File Download for a DIY 3D Printable Model - Not A Physical (Tangible) Item

This is the same exact file as the one we make and sell as a physical item, and has ALL THE SAME USER FRIENDLY FEATURES:

- EASY FACESHIELD INSTALLATION NO GLUE REQUIRED!
- Printable T-Visor Template included!
- "Ear" details are MOUNTED WITH SCREWS utilizing threaded inserts installed into the parts.
- The stem that holds the eyepiece is hollow and can be REINFORCED with 5mm (3/16) SQUARE BRASS TUBING, adding strength to the part and allowing EASY ACCESS FOR WIRES.
- The eyepiece is hollow, and printed in two parts that cleanly SNAP TOGETHER allowing you to add electronics if desired.

HELMET INTERIOR DIMENSIONS: Approximately 8.77" Front to Back, 7.59" Ear to Ear. Shadow is wearing the helmet in the image, she has a mid-face circumference of 21.5". The helmet fits comfortably, with space between tip of nose and T-Visor. Check yours by measuring around your head across the tip of your nose, to ensure a proper fit.

QUALITY CHECKED IN SIMPLIFY 3D AND TEST PRINTED: We print all the parts in our 3D MODEL FILES (STL's) to ensure you get a quality 3D Printable Model File and a functional part! In most cases, the DIY 3D Model Files that we sell are the VERY SAME FILES WE USE TO MAKE THE PHYSICAL ITEM.

3D PRINTING THE SABINE WREN HELMET:

Designed to be printed on a large format printer, 300X300X400mm build volume, this helmet can be printed in 1 piece. Helmet will need to be sectioned in a program like Meshmixer or Netfabb if your printer is smaller. All of the other components can be printed on a smaller printer, such as an Ender3, including the backband.

HK7335 created custom supports to minimize damage caused by slicer generated supports. They are optional. He was really impressed with the results after printing 3 helmets using them. But using slicer generated supports is down to personal preference.

We print our Mandalorian Helmets & Armor with FilaCube PLA 2 at 0.2 mm layer height, with 5 perimeters/top & bottom layers, and 20% infill.

HARDWARE LIST available on our website: https://www.makerbak3d.com/

ADDITIONAL HARDWARE REQUIRED: You will need the following hardware (or similar) to complete the helmet build:

1x - 3/16" square brass tube
5x - M3 x .05 x 12mm screws
5x - 3mm washers

ADDITIONAL INFORMATION:

Included with the 3D Printable Model File is a detailed printing and assembly document that should explain everything clearly. However, if there's anything you're not certain about please feel free to contact us. We want you to be happy with your purchase, and will do whatever possible on our end to ensure you get a successful print!

Some cleanup, sanding or filing may be required to get everything to fit properly. We've tested the tolerances and they do work, but if you run into difficulty, or have questions, please contact us. We're happy to help, and in an extreme case where something is just not working, I will provide revised files at no cost to you.

WHERE TO GET YOUR FILES: After purchasing your files are available for download anytime once payment has been confirmed. You can find your Digital Download purchases under your Profile and Purchases.

PLEASE TAG US ON SOCIAL MEDIA SO WE CAN SEE IT IN THE WILD! And we'd be ever so grateful if you'd credit us with the 3D Model File used for your cosplay creation - @makerbak3d on Instagram, Twitter & Facebook. Thank you!

TERMS OF USE: This model and design was created by HK7335 in Blender 3D. It is 100% an original model owned by MakerBak3D and Designer HK7335.

FOR INDIVIDUAL PERSONAL USE ONLY. PLEASE DO NOT SHARE OR DISTRIBUTE FILES.

NOT FOR USE IN ANY COMMERCIAL ASPECT! DO NOT DUPLICATE, CAST, MASS PRODUCE, OR SELL THE FILE OR THE PHYSICAL OBJECT FOR PROFIT.

THIS IS THE WAY.

This is not an official licensed product and is only considered fan art protected under the fair-use act.

Not associated with LUCASFILM LTD. ™ or any LFL Ltd. ™ Film or Franchise. "Star Wars" is a registered trademark of LucasFilm Ltd. The Star Wars logo, characters, prop designs and names © LucasFilm Ltd. This document and related sites/products is not sponsored or endorsed by LucasFilm Ltd. or any of its affiliates. All © and ™ are property of their respected owners and are used here for comparative or descriptive purposes only.

Digital downloads

File delivery

Your files will be available to download once payment is confirmed.

Payment Options

Secure options
  • Accepts Etsy gift cards

Returns & Exchanges

I gladly accept cancellations

Request a cancellation within: 24 hours of purchase

I don't accept returns or exchanges

But please contact me if you have any problems with your order.

Frequently Asked Questions

Sizing details

Unless otherwise noted, helmets and armor are made to fit most males from 5'7" to 6'6". Some listings do have specific sizes noted, please take a moment to read them where included. Most items can be scaled if you feel they may not fit. There may or not be an additional charge depending on the item and material usage change. Please include your measurements with your order, or message us with any questions you may have before placing an order.

Holidays & Shipping

We are located in the U.S. and observe all National Holidays. If your order is due to ship on a National Holiday, when the U.S. Postal Service is closed, your ship date will be delayed until the next business day.

Do Unfinished Kits Include Paint or Tools?

No, our Unfinished Kits are raw 3D prints, right off the printer. We do basic support removal, and include finishing recommendations. All you'll need is some sandpaper in several grits, primer, possibly some putty, and some elbow grease. Yes, you can sand 3D prints, just don't over do it and sand correctly. Move in circular motions when possible and keep moving; don't sand in one spot too long or you could heat the area and damage your part. However, the majority of our Armor plates are 5mm thick, you'd have to go hard at it to damage them by sanding! If you have any questions, just contact us we're happy to share our process.

Do Helmets Include Padding?

No, finishing the interior of your helmet is easily done with readily available felt and/or foam. You'll need to add padding to specific areas to make the helmet sit correctly on your head, so it's best to do it yourself. We promise it's really not hard at all! There are plenty of videos on YouTube to show you how to go about padding out the interior of your MakerBak3D helmet. ;-)

Is Your Classic Mandalorian Helmet MMCC Approvable?

Yes, it is! We just had a customer have his helmet inspected by an Idaho Regional MMCC Rep, who said it looked really nice. :-)

Do you accept returns?

We do not accept returns because each item is made to order, just for you. If you have any problems with your order once received, please contact us so we can make it right.

Will your Helmet fit my head?

Our listings include size information for each helmet. Generally, Male character helmets fit up to 24" diameter heads, and Female character helmets fit up to 23.5" heads. We measure around the forehead, and that will leave room between your nose and the T-Visor in our helmets. You'll also have enough room for your interior finish/padding, and any electronics/fans you may want to install.

I entered the wrong Shipping Address...

Packages are sent to the address entered at the time of the order only, and we're not responsible for packages delivered due to incorrect address entry. ETSY PROTECTION DOES NOT ALLOW US TO CHANGE BUYER'S SHIPPING ADDRESS ENTERED AT THE TIME OF PURCHASE.

How to update your shipping address on Etsy.com:
1. Click the "Your Account" icon (top right).
2. Click "Purchases and Reviews".
3. To the right of your order, you’ll see either "Shipped" or "Not Shipped".

If your item is Not Shipped yet:
1. Contact us to cancel your order.
2. Update your shipping address in your Etsy profile.
3. Re-Order your items with the correct shipping address in your Profile.

If your item has Shipped, contact your Post Office and us immediately. Be Proactive!

Legal imprint