Sabine Wren Helmet Kit Ready To Paint
Helmets Paint Ready

Sabine Wren Helmet Kit Ready To Paint

$265.00

  • Details
    HELMET INTERIOR DIMENSIONS: Approximately 8.77" Front to Back, 7.59" Ear to Ear. Shadow is wearing the helmet in the image, she has a mid-face circumference of 21.5". The helmet fits comfortably, with space between tip of nose and T-Visor. Check yours by measuring around your head across the tip of your nose, to ensure a proper fit.

    INTERIOR DETAIL: Helmet interior is ready for your custom fit and finish. NO INTERIOR PADDING, LINING, OR FABRIC IS INCLUDED.

    Our Sabine Wren Helmet Kit is LOADED WITH USER FRIENDLY FEATURES:

    - Helmet and accessories are 3D PRINTED in PLA 2 for better flexibility and strength.
    - "Ear" details are MOUNTED WITH SCREWS utilizing threaded inserts installed into the parts.
    - The stem that holds the eyepiece is REINFORCED with 5mm (3/16) SQUARE BRASS TUBING, adding strength to the part and allowing EASY ACCESS FOR WIRES.
    - The eyepiece is hollow, and printed in two parts that cleanly SNAP TOGETHER allowing you to install electronics if desired.
    - EASY FACESHIELD INSTALLATION, NO GLUE REQUIRED!

    We print our buckets in one piece for extra strength! That's right, we take the time to print the main part of our helmets on large format printers in one piece.

    The MakerBak3D Sabine Wren Helmet Kit arrives sanded, primed & READY TO PAINT!

    The best feature of our bucket is the unique T-visor installation. The pre-cut T-visor simply slides into in slots printed into the helmet.

    3D PRINTED VISOR TEMPLATE INCLUDED to cut another Faceshield in the event it needs replacement. Also included is the original packaging for the Faceshield, so you'll have the exact product number making it easy to find a replacement locally or online.

    **NOTE: We take the utmost care in protecting the Faceshield when trimming it to fit the Helmet, however we do not manufacture the Faceshield. The Jackson Faceshields are purchased online, and we do not have an opportunity to inspect them prior to arrival. Therefore, we are not responsible for blemishes, if any.**

    POST PROCESSING: We spend about 12 hours post processing each helmet, including: sanding, priming, and wet sanding each helmet along with cutting and fitting the included visor prior to shipment. Your helmet arrives ready for paint, and the T-Visor is cut and ready to install.

    This is not an official licensed product and is only considered fan art protected under the fair-use act.

    Not associated with LUCASFILM LTD. ™ or any LFL Ltd. ™ Film or Franchise. "Star Wars" is a registered trademark of LucasFilm Ltd. The Star Wars logo, characters, prop designs and names © LucasFilm Ltd. This document and related sites/products is not sponsored or endorsed by LucasFilm Ltd. or any of its affiliates. All © and ™ are property of their respected owners and are used here for comparative or descriptive purposes only.
  • Shipping & Policies

    Shipping from United States

    Processing time

    4-6 weeks

    Customs and import taxes

    Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.

    Payment Options

    Secure options
    • Accepts Etsy gift cards

    Returns & Exchanges

    I gladly accept cancellations

    Request a cancellation within: 12 hours of purchase

    I don't accept returns or exchanges

    But please contact me if you have any problems with your order.

    Frequently Asked Questions

    Sizing details

    Unless otherwise noted, helmets and armor are made to fit most males from 5'7" to 6'6". Some listings do have specific sizes noted, please take a moment to read them where included. Most items can be scaled if you feel they may not fit. There may or not be an additional charge depending on the item and material usage change. Please include your measurements with your order, or message us with any questions you may have before placing an order.

    Holidays & Shipping

    We are located in the U.S. and observe all National Holidays. If your order is due to ship on a National Holiday, when the U.S. Postal Service is closed, your ship date will be delayed until the next business day.

    Do Unfinished Kits Include Paint or Tools?

    No, our Unfinished Kits are raw 3D prints, right off the printer. We do basic support removal, and include finishing recommendations. All you'll need is some sandpaper in several grits, primer, possibly some putty, and some elbow grease. Yes, you can sand 3D prints, just don't over do it and sand correctly. Move in circular motions when possible and keep moving; don't sand in one spot too long or you could heat the area and damage your part. However, the majority of our Armor plates are 5mm thick, you'd have to go hard at it to damage them by sanding! If you have any questions, just contact us we're happy to share our process.

    Do Helmets Include Padding?

    No, finishing the interior of your helmet is easily done with readily available felt and/or foam. You'll need to add padding to specific areas to make the helmet sit correctly on your head, so it's best to do it yourself. We promise it's really not hard at all! There are plenty of videos on YouTube to show you how to go about padding out the interior of your MakerBak3D helmet. ;-)

    Is Your Classic Mandalorian Helmet MMCC Approvable?

    Yes, it is! We just had a customer have his helmet inspected by an Idaho Regional MMCC Rep, who said it looked really nice. :-)

    Do you accept returns?

    We do not accept returns because each item is made to order, just for you. If you have any problems with your order once received, please contact us so we can make it right.

    Will your Helmet fit my head?

    Our listings include size information for each helmet. Generally, Male character helmets fit up to 24" diameter heads, and Female character helmets fit up to 23.5" heads. We measure around the forehead, and that will leave room between your nose and the T-Visor in our helmets. You'll also have enough room for your interior finish/padding, and any electronics/fans you may want to install.