RAW UNFINISHED 3D PRINTED Mandalorian Body Armor WITH ONLY BASIC SUPPORT CLEANUP. YOU WILL NEED TO PREPARE THE SURFACE OF YOUR ARMOR PLATES FOR PAINT, AND PROVIDE YOUR OWN SNAPS AND/OR VELCRO FOR ATTACHING TO YOUR VEST.
PLEASE CHECK THE SIZE CHART IMAGE BEFORE ORDERING TO ENSURE A PROPER FIT.
- CURVED to fit the body
- CAPE LOCKS on the Collar Plate
- INSETS FOR SNAPS on the back side of the Chest Plates, Collar Plate, Belly Plate. & Pauldrons.
COMPLETE KIT INCLUDES:
2 Chest Plates (5mm thick)
1 Center Diamond (5mm thick)
1 Collar Plate with Cape Lock feature (5mm thick, arrives in two parts must be glued together)
1 Belly Plate (5mm thick)
2 Shoulder Pauldrons (3.5mm thick)
1 Crotch Plate/Codpiece (3.5mm thick)
Hardware for Cape Locks (screws, washers)
OPTIONAL HARDWARE NOT INCLUDED: 3/8" Socket, 5/8" Cap Snaps can be installed into the inserts on the back, making it easy to attach the Armor to your Vest.
SNAP RECOMMENDATION: We get our snaps from Amazon, this set has enough to install snaps on all the armor plates in this Kit -> https://amzn.to/3140muC
ABOUT 3D PRINTING: 3D Printed items are created in a layer by layer process using filament material. This item is printed with PLA plastic which is biodegradable, non-toxic and washable with soap and water. There could be very slight imperfections (ie dimples) and/or layer lines may be visible. This is perfectly normal for 3D printed items and does not affect their performance. However, it does make every item completely unique in the World!
This is not an official licensed product and is only considered fan art protected under the fair-use act.
Not associated with LUCASFILM LTD. ™ or any LFL Ltd. ™ Film or Franchise. "Star Wars" is a registered trademark of LucasFilm Ltd. The Star Wars logo, characters, prop designs and names © LucasFilm Ltd. This document and related sites/products is not sponsored or endorsed by LucasFilm Ltd. or any of its affiliates. All © and ™ are property of their respected owners and are used here for comparative or descriptive purposes only.
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.
Request a cancellation within: 24 hours of purchase
But please contact me if you have any problems with your order.
Unless otherwise noted, helmets and armor are made to fit most males from 5'7" to 6'6". Some listings do have specific sizes noted, please take a moment to read them where included. Most items can be scaled if you feel they may not fit. There may or not be an additional charge depending on the item and material usage change. Please include your measurements with your order, or message us with any questions you may have before placing an order.
We are located in the U.S. and observe all National Holidays. If your order is due to ship on a National Holiday, when the U.S. Postal Service is closed, your ship date will be delayed until the next business day.
No, our Unfinished Kits are raw 3D prints, right off the printer. We do basic support removal, and include finishing recommendations. All you'll need is some sandpaper in several grits, primer, possibly some putty, and some elbow grease. Yes, you can sand 3D prints, just don't over do it and sand correctly. Move in circular motions when possible and keep moving; don't sand in one spot too long or you could heat the area and damage your part. However, the majority of our Armor plates are 5mm thick, you'd have to go hard at it to damage them by sanding! If you have any questions, just contact us we're happy to share our process.
No, finishing the interior of your helmet is easily done with readily available felt and/or foam. You'll need to add padding to specific areas to make the helmet sit correctly on your head, so it's best to do it yourself. We promise it's really not hard at all! There are plenty of videos on YouTube to show you how to go about padding out the interior of your MakerBak3D helmet. ;-)
Yes, it is! We just had a customer have his helmet inspected by an Idaho Regional MMCC Rep, who said it looked really nice. :-)
We do not accept returns because each item is made to order, just for you. If you have any problems with your order once received, please contact us so we can make it right.
Our listings include size information for each helmet. Generally, Male character helmets fit up to 24" diameter heads, and Female character helmets fit up to 23.5" heads. We measure around the forehead, and that will leave room between your nose and the T-Visor in our helmets. You'll also have enough room for your interior finish/padding, and any electronics/fans you may want to install.
Packages are sent to the address entered at the time of the order only, and we're not responsible for packages delivered due to incorrect address entry. ETSY PROTECTION DOES NOT ALLOW US TO CHANGE BUYER'S SHIPPING ADDRESS ENTERED AT THE TIME OF PURCHASE.
How to update your shipping address on Etsy.com:
1. Click the "Your Account" icon (top right).
2. Click "Purchases and Reviews".
3. To the right of your order, you’ll see either "Shipped" or "Not Shipped".
If your item is Not Shipped yet:
1. Contact us to cancel your order.
2. Update your shipping address in your Etsy profile.
3. Re-Order your items with the correct shipping address in your Profile.
If your item has Shipped, contact your Post Office and us immediately. Be Proactive!
Mar 3, 2020
Blown away! Armor that could actually be armor! These are the real deal. Perfect fit and super detailed. Even as an unfinished prints.... You could almost just slap some paint on and go! Definitely head turning armor. Superior quality. You guys naild it.
Jan 11, 2020
Top notch quality, great curvature on the plates, perfect foundation to build my kit. My second purchase from this seller and very impressed with the work. Thanks again, couldn't be happier.
Jan 4, 2020
Amazing experience from start to finish - I wish I could give 10 stars! The shop owners were super communicative and fast to respond to all my questions. They also scaled the armor down and altered the shape slightly to fit me, and sent me updates and photos along the way to make sure I loved everything. My armor also arrived much more quickly than I expected AND with an adorable gift as a bonus! I will absolutely be back for my other Mando parts and will be updating with photos when I’m finished. Can’t recommend MakerBak3d enough!!
Dec 26, 2019