The Classic Dented Mandalorian Helmet is the same as our Deluxe Classic Mandalorian Helmet with 2 additional features:
- Infrared Emitter Nodes (arrows)
- The Dent
Whoops, we did not get images with the Rangefinder - rest assured it is included with the Helmet and looks the same as our Deluxe Classic Mandalorian Helmet.
Our 3D Printed Electronics Ready Classic Dented Mandalorian Bounty Hunter Helmet Unpainted is LOADED WITH USER FRIENDLY FEATURES:
- Helmet and accessories are 3D PRINTED in PLA 2, a proprietary formulation by FilaCube. PLA 2 is a superior PLA with better flexibility and strength.
- Rear detail snaps in place - NO GLUE REQUIRED, and can be swapped out with Custom Designed rear detail.
- "Ear" details are MOUNTED WITH SCREWS utilizing threaded inserts installed into the parts.
- Rangefinder is ELECTRONICS READY, with a complete pass-through from the helmet to the eyepiece.
- The stem that holds the eyepiece is REINFORCED with 5mm (3/16) SQUARE BRASS TUBING, adding strength to the part and allowing EASY ACCESS FOR WIRES.
- The eyepiece is hollow, and printed in two parts that cleanly SNAP TOGETHER allowing you to install electronics if desired.
- EASY FACESHIELD INSTALLATION NO GLUE REQUIRED!
We print our buckets in one piece for extra strength! That's right, we take the time to print the main part of our helmets on large format printers in one piece.
The MakerBak3D Classic sci-fi Dented Mandalorian (Mando) Bounty Hunter Helmet arrives sanded, primed & ready for your custom paint job!
The best feature of our bucket is the unique T-visor installation. The pre-cut T-visor slides into and rests in slots printed into the helmet, and then is secured with one M3 screw at the left side.
The T-Visor is cut from a Jackson 29080 IR/UV industrial grade Faceshield (https://www.thesafetyequipmentstore.com/138-29080.html) so it's really tough. And, with it's grade 5 rating, you can see out but the world can't see you! The only exception is if you are in really bright direct light. I have personally tested this Faceshield inside WonderCon and the Hilton Hotel Lobby; you can see just fine. I prefer this Faceshield over smoked acrylic for it's ultra dark tint and durability.
Another advantage to using this particular Faceshield is that it's pre-curved, giving it a perfect arc at the bottom of the T-visor which matches the helmets curve. The curve also provides natural tension that helps keep the visor secure.
**NOTE: We take the utmost care in protecting the Faceshield when trimming it to fit the Helmet, however we do not manufacture the Faceshield. The Jackson Faceshields are purchased online, and we do not have an opportunity to inspect them prior to arrival. Therefore, we are not responsible for blemishes, if any.**
3D PRINTED VISOR TEMPLATE INCLUDED to cut another Faceshield in the event it needs replacement. Also included is the original packaging for the Faceshield, so you'll have the exact product number making it easy to find a replacement locally or online.
POST PROCESSING: We spend about 12 hours post processing each helmet, including: sanding, priming, and wet sanding each helmet along with cutting and fitting the included visor prior to shipment. Your helmet arrives ready for paint, and the T-Visor is cut and ready to install.
HELMET SIZE: Approximately 9.25" Front to Back, 8.5" Ear to Ear.
HARDWARE INCLUDED FOR ASSEMBLY: 5 each M3x.5x12; 3 each M3x.5x16.
INTERIOR DETAIL: Helmet interior is ready for your custom fit and finish. NO INTERIOR PADDING, LINING, OR FABRIC IS INCLUDED.
WANT IT CUSTOMIZED? Because the "ear" and rear detail can be removed, you can have Custom Designed pieces created to reflect your personal style. This unique feature allows you to create more than one look with our Mandalorian Helmet!
ABOUT 3D PRINTING: 3D Printed items are created in a layer by layer process using filament material. This item is printed with PLA plastic which is biodegradable, non-toxic and washable with soap and water. There could be very slight imperfections (ie dimples) and/or layer lines may be visible. This is perfectly normal for 3D printed items and does not affect their performance. However, it does make every item completely unique in the World!
This is not an official licensed product and is only considered fan art protected under the fair-use act.
Not associated with LUCASFILM LTD. ™ or any LFL Ltd. ™ Film or Franchise. "Star Wars" is a registered trademark of LucasFilm Ltd. The Star Wars logo, characters, prop designs and names © LucasFilm Ltd. This document and related sites/products is not sponsored or endorsed by LucasFilm Ltd. or any of its affiliates. All © and ™ are property of their respected owners and are used here for comparative or descriptive purposes only.
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.
Request a cancellation within: 6 hours of purchase
But please contact me if you have any problems with your order.
Most items can be scaled if you feel they may not fit. Please include your measurements with your order, or message us with any questions you may have.
We are located in the U.S. and observe all National Holidays. If your order is due to ship on a National Holiday, when the U.S. Postal Service is closed, your ship date will be delayed until the next business day.