MEETS ALL REQUIREMENTS FOR MANDALORIAN MERCS COSTUME CLUB
This is a Digital File Download for a DIY 3D Printable Model - Not A Physical (Tangible) Item
The file is the same exact model used to make the Ready To Paint Kit, and is LOADED WITH USER FRIENDLY FEATURES:
- Rear detail snaps in place - NO GLUE REQUIRED, and can be swapped out with Custom Designed rear detail.
- "Ear" details are MOUNTED WITH SCREWS utilizing threaded inserts installed into the parts.
- Rangefinder is ELECTRONICS READY, with a complete pass-through from the helmet to the eyepiece.
- The stem that holds the eyepiece is hollow and can be REINFORCED with 5mm (3/16) SQUARE BRASS TUBING, adding strength to the part and allowing EASY ACCESS FOR WIRES.
- The eyepiece is hollow, and printed in two parts that cleanly SNAP TOGETHER allowing you to install electronics if desired.
- EASY FACESHIELD INSTALLATION NO GLUE REQUIRED!
LAST UPDATE: 10/14/19 - Added new Alternate Magnet assembly. You can redownload the .zip file from your Digital Download purchases under your Profile and Purchases.
QUALITY CHECKED IN SIMPLIFY 3D AND TEST PRINTED: We print all the parts in our 3D MODEL FILES (STL's) to ensure you get a quality 3D Printable Model File and a functional part! In most cases, the DIY 3D Model Files that we sell are the VERY SAME FILES WE USE TO MAKE THE PHYSICAL ITEM.
3D PRINTING THE JANGO FETT HELMET:
Designed to be printed on a large format printer, 300X300X400mm build volume, this helmet can be printed in 1 piece. Helmet will need to be sectioned in a program like Meshmixer or Netfabb if your printer is smaller. All of the other components can be printed on a smaller printer, such as an Ender3, including the backband.
HK7335 created custom supports to minimize damage caused by slicer generated supports. They are optional. He was really impressed with the results after printing 3 helmets using them. But using slicer generated supports is down to personal preference.
ADDITIONAL HARDWARE REQUIRED FOR ASSEMBLY NOT INCLUDED WITH THIS DIGITAL DOWNLOAD: You will need the following hardware (or similar) to complete the helmet build:
1x M3 x .05 x 10mm screw - Rangefinder_Axel/Stem connector
5x M3 x .05 x 12mm screws - Ears attach
6x 3mm washers
Alternate Magnet assembly:
There is a space on the inside of the helmet that is designed to accept a magnet of this type and size: (1.26”D x 0.2”H Black Epoxy Coated Neodymium Disc Countersunk Hole Magnets)
Amazon carries all of hardware listed at a decent price, and quick shipping if you're a Prime member.
OPTIONAL HARDWARE FOR ALTERNATE MAGNET ASSEMBLY:
2x M3 x 15 x 0.8mm steel washers
1x 1.26" D x 0.2" Neodymium Disc Magnet
HELMET SIZE: Approximately 9.25" Front to Back, 8.5" Ear to Ear. CAN BE SCALED IN YOUR SLICING SOFTWARE.
Included with the 3D Printable Model File is a detailed printing and assembly document that should explain everything clearly. However, if there's anything you're not certain about please feel free to contact us. We want you to be happy with your purchase, and will do whatever possible on our end to ensure you get a successful print!
Some cleanup, sanding or filing may be required to get everything to fit properly. We've tested the tolerances and they do work, but if you run into difficulty, or have questions, please contact us. We're happy to help, and in an extreme case where something is just not working, I will provide revised files at no cost to you.
WHERE TO GET YOUR FILES: After purchasing your files are available for download anytime once payment has been confirmed. You can find your Digital Download purchases under your Profile and Purchases.
PLEASE TAG US ON SOCIAL MEDIA SO WE CAN SEE IT IN THE WILD! And we'd be ever so grateful if you'd credit us with the 3D Model File used for your cosplay creation - @makerbak3d on Instagram, Twitter & Facebook. Thank you!
NOT INTO DIY? Get the Jango Fett Helmet shipped to your door Ready To Paint! https://www.etsy.com/listing/732884579/
FOR INDIVIDUAL PERSONAL USE ONLY.
NOT FOR USE IN ANY COMMERCIAL ASPECT! DO NOT DUPLICATE, CAST, MASS PRODUCE, OR SELL THE FILE OR THE PHYSICAL OBJECT FOR PROFIT.
IF PEOPLE RESPECT THE POLICY WE WILL CONTINUE TO MAKE 3D PRINTABLE FILES AVAILABLE. THANK YOU FOR RESPECTING OUR LABOR!
This is not an official licensed product and is only considered fan art protected under the fair-use act.
Not associated with LUCASFILM LTD. ™ or any LFL Ltd. ™ Film or Franchise. "Star Wars" is a registered trademark of LucasFilm Ltd. The Star Wars logo, characters, prop designs and names © LucasFilm Ltd. This document and related sites/products is not sponsored or endorsed by LucasFilm Ltd. or any of its affiliates. All © and ™ are property of their respected owners and are used here for comparative or descriptive purposes only.
Your files will be available to download once payment is confirmed.
Request a cancellation within: 6 hours of purchase
But please contact me if you have any problems with your order.
Most items can be scaled if you feel they may not fit. Please include your measurements with your order, or message us with any questions you may have.
We are located in the U.S. and observe all National Holidays. If your order is due to ship on a National Holiday, when the U.S. Postal Service is closed, your ship date will be delayed until the next business day.